History of this particular vehicle
Peacekeeper
This vehicle appeared in Balkans in the
contingent of Dutch peacekeepers, tasked with protection of Srebrenica. They
fielded a dozen of such vehicles, painted white with large UN emblems. The faith of Dutchbat is not a happy one, as
they surrendered their equipment to VRS, being limited with UN mandate to
oppose the war factions in Bosnian conflict. Their equipment was used by Serb
forces, and one member of 10th Sabotage Detachment was killed when YPR, driven by
members of this detachment, turned over on the road.
in Dutch Battalion in Srebrenica
under new management: 10th Sabotage Detachment VRS
War criminal
Further destiny of those vehicles is not known.
Whether they remained within above mentioned detachment (whose members were
attributed for killing of around 1500 civilians and prisoners form Srebrenica) ,
or they might have been part of some other unit is yet to be discussed. Couple
months after the fall of Srebrenica (in July 1995), the Dayton peace agreement
was signed in the end of that year. We can identify 2 YPR over painted in
Yugoslav people`s army „SMB“ – sivo
maslinasta boja, a faded olive drab colour used for army vehicles.
Interesting enough, one YPR still has protective shields in white color. After
Dayton agreement, some equipment is transferred to Serbia, where State Secret
service’s Unit for special operations used those vehicles. UN forces recovered
most vehicles from various depots in Bosnia, but two were missing…
Counter terrorist
Unit for special operations (JSO) was founded
as Secret service’s paramilitary unit, under Ministry of interior. They fielded
various vehicles, including booty from Bosnia – 2 YPR and one Grizzly. These
vehicles were used in emerging conflict in Kosovo, and their most famous task
was during the siege of Adam Jasari house in village of Prekaz. It was filmed
by AFP (1:24 - 1:45), and when British intelligence analyzed strange equipment from that
video, it turned out that those were Dutch vehicles. It is assumed that one YPR
was lost during the conflict in Kosovo.
Mutineer
The last remaining one was photographed
when JSO mutinied in 2003, after they were used to arrest two war criminals.
The vehicle was photographed outside JSO barracks. After subsequent
assassination of Serbian Prime minister, where leading cadre of the unit
participated, the unit was disbanded. The accused ones were prosecuted,
officers downgraded and personnel transferred to Gendarmerie.
JSO mutiny in Kula: YPR 765 - 4th vehicle in a row
Gendarme on “administrative line”
Gendarmerie is special police unit intended to
suppress armed rebellion, among other tasks. Its role was evident in
controlling the “administrative line” with Kosovo. As military handed over to
police the task of border protection, that task was fulfilled by border police.
As Serbia do not recognize Kosovo as a sovereign state, it does not see the
demarcation line as “the border”, but as “the administrative line”, hence
border police couldn’t fulfill such task. Coupled with ethnic tensions in the
area, increased smuggling and trafficking, with occasional armed incidents,
Gendarmerie was given such task. It is located within Niš detachment, with
similar “one of a kind” vehicles: Grizzly, Saxon, Panhard, BOV upgraded with
Romanian TAB turrets, BVP M80 with experimental turret etc.
The vehicle
Main distinguishing features of this vehicle
are installed weapons and rubber protection skirts. The original weapon was
M2HB .50cal machine gun, with the option of further two 7,62mm MGs for the crew.
In its current outlook, YPR is armed with NSV 12,7mm MG along with 30mm AGL M93
in the main turret.
The interesting feature are rubber skirts,
intended to enhance protection of vehicle by slowing the bullets and
projectiles and activate grenades/rockets before they contact the armor,
consuming and dispersing heat blast. On the photographed vehicle in 2006-2009
period, only several skirts remained – in frontal area, on back doors and
around the turret, revealing interesting attaching points on the vehicle.
The model
The base kit is AFV club YPR 765 PRI SFOR
It has large turret with 25mm gun, the version not used in Bosnia. I replaced that turret with the one from Academy M113 ACAV kit.
Further improvements included adding protective rubber over the shield, replacing right hand shield with additional weapon - 30mm AGL with protective shield. At first, i concentrated my effort to properly position AGL, to add some more space for the front shield in order to accommodate NSV machine gun, which is longer than M2HB. I added frontal rubber shield, and attached frames for left hand rubber.
Then i added AGL and other rubber shield, along with numerous nuts.
The hull was also treated with numerous frames, nuts and bolts, large amount of (on the model) missing grab handles and some rubber made out from styrene. Prior to attaching it, i treated styrene with heat source in order to slightly deform the rubber.
On the sides are numerous nuts for bolts, more than 40 on the vehicle. They were made from some leftover rods, cut to size, glued and then drilled with micro-drill.
Rear door are covered with rubber shields, but for proper paint job, the rubber will be mounted later on, when separately painted.
Heat treated curved rubber contrasted to flat metal hull.
Bolts, grab-handles, frames from styrene... everything "not-olive drab" is added.
Few pics of how it should like with loosely attached turret and with back door rubber shields set next to the vehicle.
Initial paint job started. Some parts are still left apart for easier painting.
December update: masking and paint job
To describe this process, i would modify quote from Trainspotting:
Choose to paint black and brown areas
choose to mask them properly
choose to spray over green paint
choose to modulate the paint
choose to remove the masks achieving desired camouflage
Choose your future. Choose life . . . But why would I want to do a thing like that? I chose not to choose life: I chose something else. And the reasons? There are no reasons. Who needs reasons when you've got oposite proces way harder with multiple possible errors to occur?
Choose painting green and making individual masks for each brown and black surface...
And after removal of the masks, some additional touch-ups with a fine brush and valejjo acrylics. This was a good time to learn that the whole process could have been achieved with hand brushing, as these colors are excellent for that purpose.
During this stage, additional equipment was installed, and a fine coat of gloss varnish was applied. Following steps will include dot filters and pin-wash, with minor corrections included.
Finished model, with a figure added
The figure was inspired by this Gendarme
but the vest was modeled according to this other Gendarme - a bit of artistic freedomSo a close-up of very complex digital cammo, barely visible
Нема коментара:
Постави коментар